OFF - FOR SALE: Furutech Flow15 inline filter
Item #649468363Info: Furutech Flow15 inline filter
|Days in System:||42|
Sponsored post - log in to remove this ad.
** This Ad is Marked as OFF by seller and cannot be responded to. **
I use both units on my gear. One Flow 15 goes in to my amp and the other Flow 15 to my receiver. Before installing I would get a slight buzz in my tweeter of the speakers. Not loud enough to hear at the seating area, but loud enough I could hear if I was close to the speakers. After installing, the tweeters are dead silent. EMI/RFI interference is everywhere. Its important to block that out to enjoy what your listening to the way its suppose to be.
Flow 15: $225(Retails for $300US)
The body of the Flow-15 combines two “active” materials: Nano-sized ceramic particles and powdered carbon plus Nylon and fiberglass to form an extremely effective mechanically and electrically damped body ・Use between power cables and power distributors or power cables and components ・Eliminates radiated AC noise
Fitted with 24k gold-plated α (Alpha) nonmagnetic FI-15E G connector ・AC-1001G EMI-filtering IEC features 24k gold-plated α (Alpha) nonmagnetic copper alloy conductors plus… ・A parallel circuit with an in-line coil and capacitor that reduces noise at 100KHz by 8dB and at 500KHz by 14 dB and at 10MHz by more than 30dB
Floating Field Damper™ (Earth/Ground Jumper System) with US Patent No.: 6,669,491 ・Patent-pending metal cable clamp improves grip and reduces mechanically and electrically induced distortion ・α (Alpha) conductor shield for protection against radiated noise
・RoHS-compliant flexible PVC sheath improves vibration isolation ・Special high-grade PE Insulation contributes to reduced capacitance The AC-1001G EMI Filtering IEC Input The parallel circuit with in-line coil and capacitor reduces noise at 100 KHz by 8dB and at 500 KHz by 14dB and at 10MHz by more than 30dB
The AC-1001G EMI Filtering IEC Input ・24k gold-plated α (Alpha) nonmagnetic copper alloy conductors ・Outer cover： Chrome-plated steel-plate ・Inner cover： Nylon fiberglass ・Inner Box： Nylon fiberglass ・Inner parts held in place with Piezo Epoxy ・Rating： AC 115V/250V 10A 50/60Hz Cable Specifications: •Twisted 3 core high end performance power cable •Red- 37 strands of 0.26mm silver-plated α (Alpha) OFC Conductor •White -37 strands of 0.26mm silver-plated α (Alpha)OFC Conductor •Green- 37 strands of 0.26mm α (Alpha) OFC Conductor •Insulation: Polyethylene (Red/ White / Green) 3.5mm diameter •Fillers: Cotton with paper tape wrap •Sheath: RoHS-compliant Flexible PVC (Burgundy) approx. 10mm diameter
Canuck Audio Mart is FREE!