INACTIVE - FOR SALE: Martin Logan Speakers
Item #649464536Info: Martin Logan Speakers
||9 - Excellent (?)
Sep 25, 18 11:37am (PST)
Edited: Sep 26, 18 7:53pm
|Days in System:||2|
Sponsored post - log in to remove this ad.
** This Ad is Marked as OFF by seller and cannot be responded to. **
Selling complete sets of Martin Logan speakers and subs. All in excellent working condition.
Sorry will not ship. Must pickup.(Cash and Pickup only). Will also trade all for a pair of Martin Logan Motion 20 Floor
standing speakers. Willing to negotiate.
2 pair of Martin Logan Motion LX16: same as the Motion 15
60–25,000 Hz ± 3 dB
80° x 80°
92 dB @ 2.83 volts/ meter
5 Ohms. Compatible with 4, 6, or 8 Ohm rated
1” x 1.4” (2.6cm x 3.6cm) Folded Motion
Transducer with 5.25” x 1.75” (13.3cm x 4.4cm)
5.25” (13.3cm) aluminum cone with cast basket.
Non-resonant asymmetrical chamber format. Rigid
structured dust cap to reduce cone break-up modes.
Custom air core coil and low DCR steel laminate
inductors. Polypropylene film capacitors in series
and low DF electrolytic capacitors in parallel.
Overall system thermal/current protection.
Custom 5-way binding posts
12 lbs. (5.4 kg)
11” x 6.5” x 9.5”
(28cm x 16.5cm x 24.2cm)
2 Martin Logan Dynamo 500 Subwoofers
System Frequency Response
29–200 Hz ± 3 dB. Anechoic in the LFE mode.
Low Pass Filter Frequencies
Low Pass Filter Switch
Bypass (LFE In), Variable (L&R In)
10” (25.4cm) high-excursion, polypropylene cone with
extended throw driver assembly; ported
120 watts RMS (360 watts peak)
Left & Right/LFE RCA – 20,000 Ohms
Left & Right/LFE RCA Line Level
Mains Power Draw
28.5 lbs. each (12.9 kg)
13 inches W x 15.27 inches D x 14.69 inches H
(33cm W x 38.8cm D x 37.3cm H)
1 pair of Martin Logan Motion 2i:
115–23,000 Hz ± 3 dB
80° x 80°
86 dB @ 2.83 volts/ meter
6 Ohms. Compatible with 4, 6,
or 8 Ohm rated amplifiers.
0.94” x 1” (2.4cm x 2.5cm)
Folded Motion Transducer with
2.8” x 1.25” (7.1cm x 3.2cm)
3.5” (8.9cm) poly cone with
stamped steel basket. Nonresonant
format. Rigid structured dust cap
to reduce cone break-up modes.
Custom air core coil and low
DCR steel laminate inductors.
Polyester film capacitors in series
and low DF electrolytic capacitors
in parallel. Overall system
Push style with banana jacks
3.4 lbs. (1.54 kg)
10” x 4.7” x 4.6”
(25.5cm x 11.8cm x 11.7cm)
2 pairs of Sonora Speaker Stands:
The S1M single post metal speaker stand series features adjustable spikes with rubber covers and can be post as a straight post or 45º position.
All 18 gauge cables and sub cables, wall mounts, included.Sorry no boxes.
Similar items you might be interested in
Canuck Audio Mart is FREE!