FOR SALE: Custom made Dynaudio 3 way speakers
Item #649460453Info: Custom made Dynaudio 3 way speakers
||8 - Very good (?)
Sep 07, 18 11:52am (PST)
Edited: Sep 07, 18 11:56am
[other classified ads]
11 See details
100% Positive Feedback
|Days in System:||45|
Sponsored post - log in to remove this ad.
Sensitivity (2.83 V/1 m):
Recommended Amp. Power:
Small size rooms: >40 watts
Medium size rooms: >80 watts
Large size rooms: >150 watts
IEC Long Term Power Handling:
Impedance, (20-200 Hz):
4.0 - 11 ohms
Impedance, (200-20 kHz):
4.0 - 8 ohms
Frequency Response (+/- 3 dB):
35 Hz - 25 kHz
Frequency Response (+/- 1 dB):
70 Hz - 20 kHz
Internal Cabinet Volume:
110 lbs each
Dimensions (W x H x D):
10.25" x 42.75" x 14.75" (257 x 1085 x 375 mm)
3 way. The crossover is impedance and phase corrected
Biwarable Gold plated binding posts
D21/2 - 21 mm soft dome - Magnetic fluid
D52AF - 52mm soft dome - Magnetic fluid
21W54 - Die-cast chassis. 21 cm one-piece moulded MSP polypropylene cone. 54 mm long throw wire voice coil, wound on Kapton.
Hardwired, housed in the separate enclosure in the base, easily accessible through the 6 screws for any further upgrades. Only high grade components has been used (Hovland, Solen, Lync), Capacitors with low loss dielectricum, Zero compression non-inductive resistors, Hepta-litz "air cores" inductors. All internal wiring is done with Cardas cables.
Front baffle 65 mm (3x20 mm MDF sandwich) with
5 mm bituminous internal damping and 10 mm acoustic damping outside.
Side and back walls 45 mm (2x20 mm MDF sandwich) with internal MDF bracing and 5 mm bituminous damping panels.
Large 70 mm diameter vent with trumpet shape in both ends, vent plugs included.
Red Mahogany real wood veneer finish
Grilles included. Spikes included.
Canuck Audio Mart is FREE!