Gently used with very few hours. Dust cover has some light marks on it. Enjoy an espresso during a demo before you take it home. Pickup in Barrhaven, or will deliver in the Ottawa area. I'm happy to set-it up and align it for you as well. Willing to ship at actual cost of freight - counter weight and platter will be removed.
Info from the web:
Three-Speed Turntable plays all the hits – both old and new Aluminum Die-cast Platter and upgraded motor assembly provide years of service and stability Newly designed, low-friction spindle reduces platter drag, resulting in enhanced speed consistency and tonal accuracy Integrated USB Port for Digital Output allows PC Recording for easy archiving Anti-skating Mechanism stays in the groove so you can stay in the groove Static-balanced S-shape Tone-arm with Universal Head-shell for improved tracking Built-in Phono EQ Amplifier and Switchable Phono/Line Outputs ensures easy setup with any Amp or Receiver High-density MDF Chassis dampens vibrations and delivers rock solid performance Detachable Dust Cover enables you to customize the experience to fit your own personal style Upgraded Audio-Technica AT100E equivalent MM equivalent cartridge for accurate and detailed sound reproduction
TN-400S SPECIFICATIONS Turntable section Drive System Belt Drive Motor DC Motor Speed 33 1/3 RPM, 45 RPM, 78 RPM Rotation Speed Variation +/–2% Wow and Flutter 0.2% Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF) 60dB or higher (unweighted, 20kHz LPF) Platter Aluminum Die-cast Diameter of Platter 12", 30cm Tonearm section Type Static Balanced, S-shaped Effective Arm Length 8.8", 223mm Stylus Pressure Range 0 to 5g Supported Cartridge Weight 3.5 to 6.7g 13.5 to 16.5g (including head shell) Anti-skating Adjustment Supported Cartridge section Type MM type (audio-technica AT100E factory installed) Stylus Shape Joint-oval 0.3 x 0.7 mil Stylus Construction Bonded Round Shank Mount Half inch Frequency Response 20Hz to 20kHz Channel Separation 27dB at 1kHz Output Balance 1.5dB Needle Pressure 1.0 to 1.8g (approximate value 1.4g) Vertical Tracking Angle 23 degrees Supported Load Impedance 47k ohms Output Voltage 4.5mV (1kHz, 5cm/sec.) Cartridge Weight 6.5g Replacement Stylus audio-technica AT100E Phono Equalizer Amplifier Type of Amplifier MM type (On/Thru switchable) Analog Output Connector RCA Pin jack (Gold-plated) Output Voltage Phono/Line switchable Phono Output 4.5mV (± 3dB) Line Output 230mV (–13dBV) USB Output section Connector USB B type Output Signal PCM 48kHz/16-bit Supported OS Windows 7 Windows 8 Windows 8.1 Windows 10 OS X Lion (10.7) OS X Mountain Lion (10.8) OS X Mavericks (10.9) OS X Yosemite (10.10) OS X El Capitan (10.11) macOS Sierra (10.12) Power AC 100 to 240V, 50/60Hz Power Consumption 1.5W (less than 0.5W at Standby) Overall Dimensions (W x H x D) 16.5" x 4.6" x 14.0" 420 x 117 x 356 mm Weight Approx. 10.8 lbs. 4.9 kg Accessories Felt Mat, EP Adapter, Counter Weight, Head-shell (audio-technica AT100E equivalent installed), Turntable(Platter), Dust Cover, Dust Cover Hinges, RCA Audio Cable with GND wiring, AC Adapter (GPE053A-V120050-Z), Owner’s Manual
OBM, and all factory accessories.
Re: Teac TN-400S turntable, 3 speed with Bordeaux Red plinth
Sorry! This ad does not allow guest replies. Please log in, or register to reply to this ad.
Calculate Estimated Shipping Cost
This feature is only available for logged in members. Please login or register here.