SOLD - FOR SALE: Plinius 9100 SE Limited Edition Integrated Amp - Excellent Condition
Item #649416829Info: Plinius 9100 SE Limited Edition Integrated Amp - Excellent Condition
||Cash, Paypal, Cheque, Money Order
||18.14 (kg) Calculate Shipping
||60.96cm x 60.96cm x 40.64cm
||9 - Excellent (?)
Feb 21, 18 2:44pm (PST)
Edited: Mar 02, 18 12:09pm
[other classified ads]
20 See details
100% Positive Feedback
|Days in System:||9|
Sponsored post - log in to remove this ad.
** This Ad is Marked as SOLD by seller and cannot be responded to. **
Very rare Plinius 9100 SE Limited Edition Integrated Amplifier. The 9100SE is an upgraded reissue of the legendary model 9100 of which only 30 units were produced worldwide. The SE has larger single binding posts, a larger transformer and higher grade audio caps than the original Plinius 9100. No phono input on this unit.
This unit is #24. Serial # 7042. I have all the documentation directly from Plinius
( New Zealand ) to verify its authenticity as a SE model #24. It was exported to the US in 2013. Second owner. I've hardly used it since purchasing it last Spring 2017; putting less than 50 hours on it. Only reason for selling is I've acquired an all balanced integrated to accommodate my new balanced sources/cables.
This unit is in excellent condition both functionally and cosmetically. No scratches, dings, spots, etc. Comes with all original packaging and accessories; manual, white gloves, remote, power cord, allen wrench and fuses.
Local sale / audition welcome. Buyer to pay actual shipping cost. Add 3.9% if using PayPal. Willing to meet up with buyer from Chicago, Minneapolis or Milwaukee area.
Power: 120 Watts RMS per channel into 8 Ohms. Both channels driven from 20Hz to 20kHz at less than 0.1% total harmonic distortion.
Frequency Response: 20Hz to 20kHz ± 0.2dB. 0dB at 0Hz and -3dB at 70kHz.
Distortion: Typically <0.05% THD at rated power. 0.1% THD & IM worst case prior to clipping.
Current Output: 20A short duration peak per channel. Fuse protected.
Hum & Noise: 90dB below rated output 20Hz to 20kHz unweighted.
Input Sensitivity: 290mV RMS for rated output at 1kHz.
Input Impedance: 47k Ohms.
Input Overload: 5V RMS
Rated Pre Out Level: 1.5V RMS into 47k Ohms or higher.
Pre Out Source Impedance: Typically 1.5k Ohms.
Pre Out Minimum Recommended Load: 47k Ohms
Tape Output Level: Unity Gain at 200mV. Tape loop muting at 5V RMS input.
Dimensions: Height 105mm (4"), Width 450mm (17.75"), Depth 400mm (15.75"), Weight 10kg (22lb)
Thank you for looking.
This ad was originally posted on US Audio Mart and the seller ships to the United States.
All original packaging and accessories.
Canuck Audio Mart is FREE!