SOLD - FOR TRADE: Rega Mira - For Parts / Repair
Item #649403931Info: Rega Mira - For Parts / Repair
||1 - Shot (?)
Jan 02, 18 6:20pm (PST)
Edited: Jan 06, 18 1:05pm
Sponsored post - log in to remove this ad.
** This Ad is Marked as SOLD by seller and cannot be responded to. **
Unit has developed a 60hz buzz in both channels (left is significantly louder than right). Still plays music, but buzzing is not tolerable. I've taken the amp to Puresound to have it assessed but they were unable to diagnose the problem. I have now replaced the amp and would like to get this out of my closet. Hoping someone is interested in taking on the challenge of fixing, and or scavenging for parts, utilizing the chassis etc? Trade for a 6-pack of local beer?
CD/Tuner/Line 1/Line 2/Tape input sensitivity: 220mV. Load 10KW.
Phono input sensitivity (moving magnet): 2.1mV. Load 47KW.
(in parallel with 100pF)
Power amplifier input sensitivity = 818mV. load 24KW.
Pre-Amp Output level (with rated input levels)
818mV @ 470W. power amplifier gain = 28.8dB
Volume control LED display and step data
Each step of the volume control = 1dB
Each LED represents = 4dB
Total control range = 80dB (20 LED’s @ 4dB/LED)
Power Output (230V or 115V supply voltage)
61 Watts both channels driven into 8W.
70 Watts only one channel driven into 8W.
91 Watts both channels driven into 4W.
115 Watts only one channel driven into 4W.
215mV. Load 560W
225 Watts @ 230V or 115V @ 61 Watts both channels driven into 8W
Remote Control Phillips RC5 (system no. 16 audio pre-amp)
Recommended operating temperature 10OC - 35OC
Canuck Audio Mart is FREE!