OFF - FOR SALE: Braun Atelier A-1 Integrated Amp in Excellent Condition **RE-CAPPED** by Former Braun Service Tec
Item #649403664Info: Braun Atelier A-1 Integrated Amp in Excellent Condition **RE-CAPPED** by Former Braun Service Tec
||7 - Good (?)
Jan 01, 18 7:26pm (PST)
Edited: Jan 11, 18 5:15pm
Sponsored post - log in to remove this ad.
** This Ad is Marked as OFF by seller and cannot be responded to. **
The Atelier 1 series of components were designed by Dieter Rams.
Atelier is the elite line from the same German manufacturer as the renowned ADS speakers.
The amp has a clean slimline profile with controls hidden behind a door.
Includes 2 phono inputs, tuner, auxiliary AND and a full tape dubbing facility (tape 1 and tape 2) .
Tone controls can be switched out of the circuit.
Pre Out-Main In removable jumpers on the rear for separation of the Preamp and the Amp stages so it can be used as either a Preamp or Power Amplifier if desired.
Power meter LED display works well. Meter sensitivity can be adjusted using a built-in switch.
INCLUDES THE ORIGINAL PRINTED OWNERS MANUAL
MADE IN JAPAN
THE EXPERT RE-CAPPING WHICH WAS DONE BY THE FORMER SERVICE MANAGER FOR BRAUN AND MAKES ALL THE SONIC DIFFERENCE IN THE WORLD (BETTER! THAN NEW) AND GUARANTEES BETTER SOUND AND TROUBLE FREE SERVICE FOR AT LEAST 20 YEARS.
ALL MAJOR ELECTROLYTIC CAPACITORS AND THE SPEAKER RELAY HAVE BEEN REPLACED
The amp looks and sounds great.
Power output: 55 watts per channel into 8Ω (stereo)
Frequency response: 5Hz to 90kHz
Total harmonic distortion: 0.05%
Input sensitivity: 2mV (MM), 200mV (line)
Signal to noise ratio: 65dB (MM), 95dB (line)
Semiconductors: 46 x transistors, 8 x IC, 14 x LED, 25 x diodes, 1 x relay
Dimensions: 445 x 70 x 375mm
Weight: 8.2kg or a very solid 18.2 lbs
$210 + shipping
Canuck Audio Mart is FREE!