OFF - FOR SALE: Package - PMC EB1 & Bryston 7B SST2
Item #649382796Info: Package - PMC EB1 & Bryston 7B SST2
||9 - Excellent (?)
Oct 03, 17 3:36am (PST)
Edited: Oct 09, 17 5:19am
Sponsored post - log in to remove this ad.
** This Ad is Marked as OFF by seller and cannot be responded to. **
Here's an opportunity for a package with perfect synergy. They were awesome in my previous residence.
When the EB1 was engineered, Bryston 7B SST amps were used. Both speakers and amps come with their original boxes. PMC's are the Cherry finish. The amps have had the factory transformer update done (have the paperwork).
Everything is still boxed, therefore image of the PMC's are stock. The Bryston Pics are of the actual amps (older CAM ad from previous owner). I will unpack everything and set it up for an inspection and audition for serious buyers.
We've moved and no longer have the space to accommodate these. I've tried to hang on but wife says they have to go.
Output power: 600W continuous into 8 ohms, 900W into 4 ohms
Gain select and sensitivity: 29 dB or 23 dB.
Distortion (IM or THD+noise): <0.005%, 20Hz–20kHz, at 600W; <0.007%, 20Hz–20kHz, at 900W.
Noise measured with input shorted, 20Hz–20kHz: >110dB below rated output at 29dB gain (–75dBu), >113dB below rated output at 23dB gain (–79dBu).
Slew rate: >160V/µs.
Damping factor: >300 at 20Hz at 8 ohms.
Input impedance: 50k ohms unbalanced, 20k ohms balanced.
Balanced and unbalanced inputs
No fans or other moving parts
Convection cooled and housed in a fully aluminum chassis
Energy storage power transformers maximize dynamic range (amps were upgraded at the factory to the latest transformer spec. at a cost of over $1K).
Under manufacturer warranty until 2029.
PMC EB1 Specs
Available Finishes: Walnut, Cherry
Dimensions:H 1200mm 47.2" + 25mm 1" spikes W 294mm 11.8" D 465mm 18.3" + 12mm 0.47" grille
Drive Units:LF PMC 10” / 250mm Carbon fibre & Nomex™ Piston MF 75mm Fabric soft dome
HF 27mm fabric soft dome with Ferrofluid cooling Effective ATL™ Length:3.5m 11.5ft
Impedance:4 Ohms nominal
Input Connectors:3 pairs 4mm binding posts for Tri-Amp or Tri-Wire
Sensitivity:89 dB 1w 1m
Weight:48kg 105.6lb per unit
I would like to sell these as a package, but I may separate. Bryston's $6250.00
Please, these are priced super fair, so although I'll entertain offers, lowball's will be politely ignored.
Prefer the speakers and amps are picked up. I'm located in Port Colborne. (1 hour, 40 min from the GTA)
Boxes, Bryston Documentation
Canuck Audio Mart is FREE!