For sale a new set of Tannoy Eyris iDP speakers consisting of a master/slave pair of DC1 iDP and one TS212 iDP subwoofer. The speakers are new in original boxes. The photos of the Subwoofer in this listing are stock photos. The photos of the monitors are of an open box pair. This sale is for brand new in box speakers. The entire package consists of three boxes Two 24 X 15 X 14 boxes for the monitors and one 30 X 26 X 26 for the subwoofer. The monitor boxes weigh 36 lbs each and the subwoofer 130 lbs. Use these dimensions to estimate shipping to your location from zip 23442.
The monitors are active speakers with built-in separate amplifiers for the woofers and tweeters. These will accept analog and digital XLR inputs with a built-in HI-RES DAC up to 96khz.
Note that these are the more expensive DC (dual concentric) iDP version. The Eyris 1 line comes in three flavors: Eyris 1 (not dual concentric drivers); Eyris DC1 (dual concentric drivers, passive); and, DC1 iDP (with built-in amps/DAC/processors)
Eyris DC1 iDP PERFORMANCE System (Master & Slaves) Eyris DC1 3-Way Semi-Active Loudspeaker Frequency Response 59Hz - 50kHz (+/- 1.5dB) Low Frequency Alignment (-6dB) 48Hz CROSSOVER Crossover Frequency 1.7kHz(DSP Generated) 16kHz (Passive) DRIVE UNITS SuperTweeter™ 25mm (1") 25-micron titanium dome, neodymium magnet system Dual Concentric™ high frequency 25mm (1") 25-micron titanium dome, neodymium magnet system Dual Concentric™ low frequency 175mm (7") cast chassis (shielded) CONSTRUCTON Cabinet Volume/LF Alignment 8 Litres/Bass Reflex Dimensions (H x W x D) 460 x 196 x 240mm (18 1/4” x 7 3/4” x 9 7/16”) Cabinet Construction 18mm MDF, internally cross-braced enclosure, 30mm front baffle Finish Sycamore, American Walnut or Black Ash Total weight 14kg (30.81lbs) ELECTRONIC SYSTEM Mains Voltage 115 to 230Vac, 50 - 60Hz (switchable) Power Consumption 45W @ 1/8 Full Power (IEC 60065) Amplifier LF - Separate 300 PWM amp, Tweeter & SuperTweeter™ - 300 PWM amp SYSTEM SAMPLE RATES Internal 96kHz External 96, 88.2, 64, 48, 44.1 or 32 kHz (optional 192kHz) DIGITAL SECTON (Master only) I/O connectors XLR (2 channels AES/EBU in). 3 x RJ45 proprietary TC LINK Formats AESEBU (24 bit) Word Clock Input BNC, 75 ohm, 0.6 to 10 Vpp Display 2 x 16 character dot matrix Operation Menu system / four buttons ANALOGUE SECTION (Master only) Input connectors XLR balanced (pin 2+, pin 3-) Impedance 10/3 kÂ½ (Balanced/unbalanced) Selectable Full Scale Input level +9, +15, +21, +27 dBu Dynamic Range > 113 dB typ. (unweighted) THD+N < -105 dB typ. @ 1 kHz, -3 dBFS Cross-talk < -120 dB A to D Conversion 24 bit (Dual bit delta sigma sampling at 4.1/5.6/6.1/6.1MHz) SLAVES ONLY I/O connector’s 2-x RJ45 proprietary TC LINK
System TS212 iDP™ Active Subwoofer Frequency Response 25Hz – 150Hz (+/- 3dB) Max. SPL (@ 1m) 124dB (continuous) Crossover Frequency Set in Bass Management (DSP Generated) DRIVE UNITS Driver Complement 2 x 300mm (12") Aluminium Cone CONSTRUCTION Cabinet Volume/LF Alignment 45 Litres/Infinite baffle Dimensions (H x W x D) 520mm x 471mm x 497mm (201/2" x 185/8" x 195/8") Cabinet Construction Gray suede paint finish on top with silver insert. Black Fabric on sides MDF, Black anodised aluminium back plate. Total weight 51kg (112.2lbs) ELECTRONIC SYSTEM Mains Voltage 100 to 240Vac, 50 – 60Hz (auto – select) POWER CONSUMPTION Amplifier 1500 W PWM amp SYSTEM SAMPLE RATES Internal 96 kHz (except when slaved to digital input or Word clock Input) External 96, 88.2, 64, 48, 44.1 or 32 kHz (optional 192kHz) DIGITAL SECTION (MASTER ONLY) I/O connectors 2-x RJ45 proprietary TC LINK Dynamic Range > 113 dB typ. (unweighted), BW: 20-20kHz THD+N < -105 dB typ. @ 1 kHz, -3 dBFS Cross-talk < -120 dB, 20 Hz to 20 kHz A to D Conversion 24 bit (Dual bit delta sigma sampling at 4.1/5.6/6.1/6.1 MHz)