SOLD - FOR SALE: AudioTechnica AT-F3 III MC catridge
Item #649348592Info: AudioTechnica AT-F3 III MC catridge
||Cash, Paypal, Interac/EMT
||1.00 (kg) Calculate Shipping
||10.16cm x 25.40cm x 7.62cm
||10 - Mint (?)
Apr 16, 17 7:39pm (PST)
Edited: Aug 12, 17 3:51pm
[other classified ads]
48 See details
100% Positive Feedback
|Days in System:||118|
Sponsored post - log in to remove this ad.
** This Ad is Marked as SOLD by seller and cannot be responded to. **
This cartridge has a very few hours on it, barely used at all. It is in a mint shape and sounds phenomenal for the listed price...I do not have original package. It was bought with a new turntable mounted on it, and replaced shortly after with higher model.
Description from Audio-Technica site;
A cartridge that adopts high quality elliptical needle and aluminum cantilever and reproduces sound rich in information volume.
Neodymium magnets dramatically increased magnetic energy.
For the magnet, the maximum energy product, BHmax: 50 [kJ / m 3] Neodymium magnet was adopted, pure iron of an excellent magnetic material was adopted as the yoke, and the concentrated magnetic field of the coil gap part was further strengthened.
● PCOCC is adopted for coil and terminal pin.
Since PCOCC (single crystalline high purity oxygen free copper) does not generate grain boundaries in the transmission direction, you can enjoy pure transmission.
● High separation, wide response dual moving coil.
Adopting proprietary MC type with cylindrical coils on each of left and right channels. This structure, where L, R are generated independently, has inherently superior separation characteristics.
● Strong body that sticks to rigid body design.
Based on a precise and robust aluminum alloy, we designed a structure with resonance suppressed by hard resin. We are trying to increase the rigidity and improve the SN ratio
Model MC type
Playback frequency range 15 to 50,000 Hz
Output voltage 0.35 mV (1 kHz, 5 cm / sec.)
Channel separation 27 dB (1 kHz)
Output balance 1.5 dB (1 kHz)
Stylus pressure 1.8 to 2.2 g (2.0 g standard)
Coil impedance 12 Ω (1 kHz)
DC resistance 12 Ω
Load resistance 100 Ω or more (when head amplifier is connected)
Coil inductance 25 μH (1 kHz)
Static Compliance 35 × 10 -6 cm / dyne
Dynamic compliance 9 * 10 <-6> cm / dyne (100 Hz)
Needle tip shape Muff ellipse 0.2 x 0.7 mil
Suspension wire Resin integrated type
Vertical Tracking Angle twenty three
External dimensions H 17.3 × W 16.8 × D 25.4 mm
mass 5.0 g
Canuck Audio Mart is FREE!