SOLD - FOR SALE or TRADE: Middle Atlantic WRK-44-32 Stereo Rack
Item #649081958Info: Middle Atlantic WRK-44-32 Stereo Rack
||Cash, Paypal, Money Order, Interac/EMT
Sep 23, 13 3:22pm (PST)
Fairport Beach (In Pickering), ON
[other classified ads]
133 See details
100% Positive Feedback
|Days in System:||735532|
Sponsored post - log in to remove this ad.
** This Ad is Marked as SOLD by seller and cannot be responded to. **
Our daughter bought the rack some time ago, but when she moved into her new house it wouldn't go down the stairs. The rack includes a power strip installed at the rear with a 20 amp/120 volt plug. This is the deeper 32 1/2" rack x ~24" wide x ~84" high. With a static load rating of 10,000 pounds it can hold some hefty gear!
There are no shelves with the rack, but they are readily available as these types of racks are commonly used in professional studios and computer server rooms. Shelves could easily be made if you're a little bit handy and have some basic tools.
$300 obo. [our daughter ;-)] Will consider trades for vintage tube amps, preamps, or tuners in need of rescue.
Thanks for looking.
Here are the some Specs from the factory:
-UL Listed in the US and Canada
-Fully welded construction provides:
Static load capacity: 10,000 lbs.
UL Listed load capacity: 2,500 lbs.
Seismic Certified load capacity: 900 lbs.
-Seismic certified to the following codes and standards: 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity – Zone 4 or Seismic Design Category (SDC) "D". These are designed for Mission Critical and/or High-Importance Installations in locations with the highest level of seismicity and top floor or rooftop installations including those within UBC and CBC Essential facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use Group III facilities. For all codes, the Importance factor (Ip) is 1.5. Seismic Certified load capacity of 900 lbs. when used with WRK-Z4 seismic floor anchor brackets.
-Generous 24-1/4" OD width provides room for cables
-1/2", 3/4", 1" and 1-1/2" electrical knockouts found on removable split rear plates, top knockout plate additionally includes UHF/VHF antenna knockouts
-Available in 2 depths: 27-1/2" or 32-1/2"
-2 extra-wide pairs of 10-32 threaded rackrail standard
-Cable pass-throughs located in the face of the standard front and rear adjustable 11-gauge, 10-32 threaded, extra-wide rackrail facilitate the passing of cable from the face of the equipment to the rear
-Laser-cut 1/8" thick internal steel braces for strength
-14-gauge steel tops & bottoms, 16-gauge seamless steel sides
-Stud in base of enclosure facilitates the proper grounding and bonding of electronic equipment, as per NEBS and NEC standards
-Configurable open top accepts a number of top options
-Finished in a durable black textured powder coat
Canuck Audio Mart is FREE!