SOLD - FOR SALE: Plinius Koru Phono Preamplifier
Item #649023761Info: Plinius Koru Phono Preamplifier
|Days in System:||1207|
Sponsored post - log in to remove this ad.
** This Ad is Marked as SOLD by seller and cannot be responded to. **
Black Plinius Koru solid state phono stage in near mint condition with box, manual etc. It has both loading, capacitance and gain controls on the rear. Both balanced and unbalanced outputs. Caters to both M/C and M/M catridges. Very dynamic and quiet. It is from the estate of an audiophile who seemed to have 3 of everything. Approximately $3000 new. I can't seem to upload pictures but if you contact me I can email photos. Pick up is great or I can ship. I travel throughout western Ontario and the GTA so delivery is possible.
From the Plinius Web site:
"The chassis is actually two-in-one, allowing physical separation of the power supply from the amplification circuitry.The power supply has received very detailed attention and boasts a virtual battery approach with over 100,000 micro Farads of capacitance and very sophisticated 2 stage regulation. This ensures the lowest impedance and consequently extreme accuracy of power delivery to the amplification stages.
The amplification and equilisation circuitry is specific to the new Phono Preamplifier and uses the latest components ensuring accuracy and longevity. Low output moving coil cartridges as well as higher output moving magnet types can be used and there is a full range of user adjustments available on the rear panel.
Both Single Ended and Balanced Output signals are catered for and with passive high frequency and active low frequency equilisation the PLINIUS KORU Phono Preamplifier will maintain stability and finesse under the most demanding conditions.
Musically it is more revealing and will move you closer to the event than before. Details and images seem to float and the depth and ambient retrieval is a revelation.
Input: RCA Unbalanced
Adjustable Gain: 50dB, 56dB, 60dB, 66dB
Adjustable Load: 47k ohms, 22k ohms, 1k ohms, 470 ohms, 220 ohms, 100 ohms, 47 ohms, 22 ohms,
Input Capacitance: User adjustable, 100pF, 570pF
Frequency Response: 20Hz to 20kHz ±0.2dB within RIAA spec
Signal to Noise Ratio: -80dB wrt 5mV input, A weighted
Distortion: below 0.01% THD at all levels below clipping
Output: RCA unbalanced and XLR balanced
Power/Current Consumption: 10VA 0.03A (7W) Idle/Standby
Dimensions: Height: 90mm (3.5")
Width: 450mm (17.75")
Depth: 400mm (15.75")
Weight: 5.5kg (12lb)
Canuck Audio Mart is FREE!