Welcome to CAM, a classifieds site for used audio, hifi and stereo. It is completely free
for hobbyists to post classifieds here. Register today
and start selling your audio gear!
EXPIRED - DEALER AD: Mogami 3104 Speaker Cable Terminated, Custom Length
Item #648961679Info: Mogami 3104 Speaker Cable Terminated, Custom Length
|Days in System:||1305
Sponsored post - log in to remove this ad.
Custom Terminated Mogami 3104 Speaker Cables
We have made it easy to order custom terminated speaker cables for your audio system or home theatre. Custom cables can be ordered in the terminations/lengths you need in just a few clicks, it's that easy!
Mogami 3104 speaker cables were designed to deliver maximum performance from state-of-the-art Systems. They offer true audiophile performance for accurate sound transmission with clear transparent response yet possess a rugged superflexibilty for the most demanding applications. Each conductor features many strands in rope-lay of famous MOGAMI 'Neglex' Oxygen-Free-Copper within colour-coded PVC insulation. A tough, low profile matte black superflexible PVC jacket protects the cables. In our standard non-biwire configuration these cables are 9 AWG per pole!
Four 12 AWG conductors.
14.5 mm Diameter.
Matte Black jacket.
The base $39.92 (CDN) cable consists of:
(1) 2ft Mogami 3104 speaker cable terminated at both ends with Vampire HDS3 spades in non bi-wire configuration. The price will adjust automatically when you choose a different length or Bi-wire terminations. PLEASE NOTE: the base price is for 1 cable, if you need a stereo pair (or more) change the quantity to the number required. You can order as many cables as you need, in different lengths and terminations by hitting the "order" button after selecting each cable.
We use only high quality Copper Alloy connectors on our custom cables. The standard termination for our cables is the Vampire HDS1. This is a direct gold plated, copper alloy spade. The HDS1 is a 1/4" spade that will fit standard 1/4" binding posts.
The Vampire HDS3 5/16" spade is available as an optional termination. This spade is the same quality construction as the HDS1, the only difference is the larger size. If you are ordering spade terminations for your cables be sure to check the binding post sizes on your amps and speakers to ensure you are ordering the correct size for your application. If you order your cables in a bi-wire configuration we use the Vampire HDS5 if 1/4" spades are required.
We also offer optional 4mm banana connections. We are using the Multi-Contact LS4 banana because of the excellent sonics and low mass. The rolled design of these connectors makes a tight fit in every binding post we have tried them in. Solder termination is done using a precision OK International MFR Cartridge System and Johnson AI-423 solder.
Our HDS connectors are applied using a high pressure die which creates a "gas tight" crimp connection. The wire is also given a generous treatment of DeoxIt Gold before the spade is pressed on to ensure the best contact and to inhibit corrosion.
Spade and banana connections are covered with adhesive lined Polyolefin shrinktube to offer strain relief and to help seal the connection point and conductor from the environment. Amplifier leads and Non-biwire speaker leads are also colour coded with shrinktube. We only use high grade Crosslinked Polyolefin shrinktube in our cable construction.
Get Started by selecting the length of cable you need to reach from your amplifier to your speakers. Next, select the type of termination you want on the speaker end of the cables. You have the same choices here as on the amplifier end with one exception, you may opt for single or bi-wired cables. As with the amplifier terminations, be sure to check your speaker binding posts to see which size spade you require.
Review your length, termination selections and the quantity. If everything is correct, then press the order button. The total cost of the cable with the options you selected will appear in the shopping cart at the top of the right hand navigation bar. Click "view cart" to see an itemized list of the cables ordered.
Shipping cost and any applicable taxes will be applied during checkout. Once the order is placed the cables are constructed to your specs and will ship next business day unless you decide to have them pre-conditioned on our cable cooker. Please allow four days for the pre-conditioning process.
If you have your cables pre-conditioned (burned in) on our audiodharma Cable Cooker they will require only a minimal amount of time to reach their full potential, typically about one day of normal use to settle in and another 2-3 days of normal use to reach about 90-95% of it's full potential.
For detailed pictures or to place an order, please follow the web link above.
Similar items you might be interested in
This feature is only available for logged in members. Please login
Canuck Audio Mart is FREE!